Project Context

• git installed: !which git
• CLAUDE.md: !find . -maxdepth 1 -name "CLAUDE.md" -type f
• project-discovery.md: !find . -maxdepth 3 -name "project-discovery.md" -type f

Operating Principles

Read these before dispatching anything. They constrain every step below.

• A focus area is required. This skill analyzes a specific module, directory, or feature. "Analyze the whole codebase" is not a valid input. If no focus area resolves to real files, stop and ask the user to name one.
• The agents own the judgment; the skill orchestrates. The skill validates the focus area, classifies size, selects the roster, fans agents out and in, and renders the report. It does not produce findings itself.
• The discovery roster is signal-selected; the synthesis spine always runs. han-core:structural-analyst, han-core:behavioral-analyst, han-core:risk-analyst, and han-core:software-architect run at every size BECAUSE structure, runtime behavior, risk-of-inaction, and SOLID synthesis are the irreducible core of an architectural read. Every other specialist is added only when the focus area's signals warrant it and the size band allows it, BECAUSE dispatching an agent whose domain the code does not touch burns tokens and dilutes the report with low-signal findings.
• Default to small. Start classification at small and escalate only when a higher-band signal is clearly present. Borderline signals stay at the smaller band. Under-dispatching is recoverable by re-running at a larger size; over-dispatching is not.
• Recommendations, not refactors. The skill never modifies code. han-core:software-architect (and han-core:system-architect when dispatched) produce pseudocode sketches for proposed boundaries. Implementation is a separate, later step.
• Negative results are valuable. When a dimension is genuinely clean (no concurrency in a pure-functional module, sound boundaries), the report says so. Agents must not fabricate findings to fill a section.
• Single pass, no iteration round. This skill is a fan-out / fan-in, not an iterative loop. If a band proves too small, the user re-runs at a larger size — the skill does not self-escalate mid-run.
• System-altitude work is deferred by default. han-core:software-architect defers cross-service / bounded-context / trust-boundary findings rather than absorbing them. han-core:system-architect is added to the roster only at large size and only when a boundary-crossing seam is actually present. When it is not dispatched, those deferrals are surfaced in the report so the user can dispatch han-core:system-architect separately.
• The report template lives at [references/architectural-analysis-report-template.md](./references/architectural-analysis-report-template.md). The skill renders that template by filling placeholders and removing the sections whose agent was not dispatched. It does not invent a structure inline.

Run an Architectural Analysis

Step 1: Validate the Focus Area and Resolve Project Context

Bind `$size`. If the user passed small, medium, or large as the first positional argument, bind $size to it. Anything else is part of the focus-area context, not a size; bind $size to the literal none provided.

Resolve the focus area. Take the remaining argument and conversation context as the focus area. Confirm it resolves to real files using Glob and Read. Identify the boundary: which files and directories the focus area includes, and one layer of neighbors in each direction (what it imports, what imports it). If the focus area does not resolve to actual files, stop and ask the user to clarify it before going further. If no focus area was supplied at all, ask the user to name one — do not proceed against the whole codebase.

Resolve project context. If CLAUDE.md is present (see Project Context), read its ## Project Discovery section for conventions. Fall back to project-discovery.md if present. These resolve language, framework, and convention questions so the agents infer less. If neither exists, the agents fall back to surrounding-code inference — note this in the agent briefs.

Note git availability. Read the git installed value from Project Context. If it is empty, git is unavailable: the analysts will skip churn- and recency-based reasoning and the report must state this. If it is non-empty, the analysts may use git history for churn and likelihood evidence.

State the driving concern, if any. If the user named a concern ("I suspect a race in the retry queue", "we want to split this module"), capture it. It biases every agent's attention without narrowing scope. Pass it into every brief.

Step 2: Detect Signals and Classify Size

Run targeted Grep and Glob over the focus area to detect which domains the code actually touches. These signals drive both the size band and the roster:

• Concurrency signal: async/await, Promises, threads, goroutines, workers, channels, mutexes/locks, semaphores, queues, Promise.all, WaitGroup, thread pools, atomic types.
• Security signal: authentication, authorization, sessions, tokens, passwords, secrets, crypto calls, PII fields, deserialization of untrusted input, SQL/command construction from input.
• Data signal: schema or migration files, ORM models/repositories, hand-written SQL, query builders, data-pipeline or stream/event-contract code, document-store access.
• DevOps signal: Dockerfiles, IaC (Terraform, CloudFormation, k8s manifests), CI/CD pipeline definitions, observability/metrics/tracing wiring, retry/timeout/scaling configuration.
• System-seam signal: the focus area crosses a deployable unit or bounded-context boundary — RPC/HTTP clients to sibling services, message brokers, shared databases across services, cross-context model imports, contested data ownership.
• Unfamiliar-area signal: the focus area is large or its internal structure is not legible from a first read, so the discovery analysts would benefit from a map first.

Classify the size. Default to small. Escalate only when a band's signal is clearly present; when a signal is borderline, stay at the smaller band.

• Small (default) — a single module or directory, contained surface, no cross-cutting concerns: no security signal, no data signal, no DevOps signal, no system-seam signal. The concurrency signal may be present or absent.
• Medium — two or three adjacent subsystems, OR exactly one cross-cutting concern present (one of: security, data, or DevOps signal — a single auth surface, a single data-contract, a single operational surface).
• Large — more than roughly a dozen files across multiple subsystems, OR two or more cross-cutting concerns present together, OR a system-seam signal is present, OR $size is large.

Apply the size override. If $size is not none provided, use it as the band and skip the signal-based classification above — but still select specialists by signal (a large override does not dispatch agents whose domain the code never touches). A conversational override ("run this large") is equivalent to $size.

Step 3: Build the Roster and Announce It

Synthesis spine — dispatched at every size:

• han-core:structural-analyst — static structure: module boundaries, coupling, dependency direction, abstractions, duplication. Emits S# findings.
• han-core:behavioral-analyst — runtime behavior: data flow, error propagation, state management, integration boundaries. Emits B# findings.
• han-core:risk-analyst — scores the S/B/C findings for risk of inaction (likelihood, severity, blast radius, reversibility). Emits R# items. Runs after the discovery wave.
• han-core:software-architect — synthesizes all upstream findings into intra-codebase recommendations grounded in cohesion, coupling, and SOLID, with pseudocode sketches. Emits A# items. Runs last.

Signal-selected discovery specialists — added when the signal is present and the band allows:

Roster caps by band: small runs the spine plus han-core:concurrency-analyst only (3–4 agents); medium adds one or two of {han-core:adversarial-security-analyst, han-core:data-engineer, han-core:devops-engineer, han-core:on-call-engineer} by signal (4–6 agents); large adds the remaining signalled specialists, han-core:codebase-explorer if the area is unfamiliar, and han-core:system-architect if a system-seam signal is present (6–9 agents). If more than the cap's worth of specialists are signalled, keep the band's count and prefer the specialists covering the strongest signals; note the omitted domains in the executive summary so the user can re-run larger. When both han-core:devops-engineer and han-core:on-call-engineer are signalled, prefer han-core:on-call-engineer if the focus area is application source and han-core:devops-engineer if it is infrastructure or pipelines; include both at large size only.

han-core:system-architect is the only specialist that changes han-core:software-architect's behavior: when han-core:system-architect is on the roster, han-core:software-architect still defers boundary-crossing findings but the report carries han-core:system-architect's recommendations for them instead of only listing them as deferred.

Announce the decision in one line before dispatching, with per-specialist justification — for example:

Size: medium. Focus area src/auth/ spans the session and token subsystems; one security signal detected (token handling). Roster (5): han-core:structural-analyst, han-core:behavioral-analyst (spine), han-core:concurrency-analyst (async token refresh detected), han-core:adversarial-security-analyst (token + session handling), then han-core:risk-analyst and han-core:software-architect.

State git availability in the same message if git is absent ("git unavailable — churn and recency evidence will be skipped"). Proceed without a blocking confirmation; this analysis is read-only and re-runnable, so a gate here would gate a reversible operation. If the user objects to the roster, honor the adjustment.

Step 4: Dispatch the Discovery Wave in Parallel

Launch every discovery agent on the roster in a single message with one Agent call per agent so they run concurrently: han-core:structural-analyst, han-core:behavioral-analyst, and whichever of han-core:concurrency-analyst, han-core:adversarial-security-analyst, han-core:data-engineer, han-core:devops-engineer, han-core:on-call-engineer, han-core:codebase-explorer are on the roster. Do not launch han-core:risk-analyst, han-core:software-architect, or han-core:system-architect here — they are the synthesis layer (Steps 6 and 7).

Each brief must contain:

• The resolved focus area and its boundary (the file/directory list from Step 1), plus the instruction to trace one layer outward.
• The driving concern from Step 1, if any.
• The resolved project-context conventions, or a note that none were found and surrounding-code inference applies.
• Git availability, so the agent knows whether churn/recency evidence is in scope.
• A calibration directive scaled to the band: at small, escalate only the clearest high-impact findings and let lower-confidence observations default down; at medium, surface high- and medium-impact findings; at large, surface the full finding set. This scales the brief to the size the same way the roster does.
• For han-core:adversarial-security-analyst, han-core:data-engineer, han-core:devops-engineer, and han-core:on-call-engineer: scope the brief to the focus area and direct findings at architectural concerns within it (its domain's structural and behavioral risk), not a general audit of the whole repository. For han-core:on-call-engineer, the brief must restrict findings to application source files only — infrastructure, pipelines, and IaC are out of scope.

Wait for the entire wave to return before proceeding.

Step 5: Compile the Discovery Findings

Collect the full verbatim output from every discovery agent. Preserve every numbered item and its prefix exactly: S# (structural), B# (behavioral), C# (concurrency), SEC-### (security), DOR-### (devops), and han-core:data-engineer's own finding IDs. Do not renumber, summarize, or drop items — the verbatim output is what the report carries and what the synthesis layer cross-references.

If han-core:concurrency-analyst reported "no concurrency patterns found", keep that statement verbatim — it is a valid negative result, not a missing section.

Step 6: Dispatch the Risk Analyst

Launch han-core:risk-analyst with one Agent call. Pass it the full verbatim S#, B#, and C# findings (its documented input contract). Do not pass it the security, data, or devops findings — those specialists already carry their own severity and impact framing, and han-core:risk-analyst's rubric is built for the structural/behavioral/concurrency findings that lack inherent severity. The agent emits R# items cross-referencing the upstream S/B/C findings with likelihood, severity, blast radius, and reversibility. Wait for it to return.

Step 7: Dispatch the Synthesis Architects

Launch the synthesis layer with one Agent call per architect, in a single message when both are on the roster:

• han-core:software-architect — always. Pass it the full verbatim discovery output (S/B/C plus any SEC-###, DOR-###, and han-core:data-engineer findings) AND the han-core:risk-analyst R# items. It produces A# intra-codebase recommendations with pseudocode sketches, each cross-referencing upstream findings and naming the SOLID/cohesion/coupling concern. It defers boundary-crossing findings rather than absorbing them.
• han-core:system-architect — only when it is on the roster (large size, system-seam signal). Pass it the same verbatim discovery output and R# items, plus the DOR-### and han-core:data-engineer findings explicitly (its documented optional inputs). It produces SA# cross-service / bounded-context recommendations and a context-map sketch.

Wait for the synthesis layer to return.

Step 8: Render and Present the Report

Read references/architectural-analysis-report-template.md. Render it and present the result directly in the conversation. Render rules:

1. Fill the front matter and "How to Read" frame. Set the focus area, the chosen size with its one-line justification, the dispatched roster, and git availability.
2. Carry agent output verbatim. Each analysis section is the corresponding agent's full output, unedited. The skill writes only the Executive Summary and the section prefaces.
3. Remove sections for agents that were not dispatched. Drop the section, remove its line from sections_included in the front matter, and replace its promise in the "How to Read" frame with a single line stating it was not part of this run (the same way gap-analysis handles optional sections). A small run with no concurrency signal has no Concurrency section; a run with no security signal has no Security section.
4. Handle the concurrency negative result. If han-core:concurrency-analyst ran but found nothing, keep the section and carry its "no concurrency patterns found" statement — this is a reported result, not an omission.
5. Resolve system-altitude content. If han-core:system-architect was dispatched, render its SA# recommendations in the System-Architecture Recommendations section. If it was not, omit that section and instead render han-core:software-architect's deferred boundary-crossing findings under "System-level concerns deferred", with the one-line note that the user can dispatch han-core:system-architect separately for recommendations at that altitude.
6. Write the Executive Summary last, after every other section is filled: the focus area and size, the 3–5 most critical findings across all dispatched dimensions, the highest-impact recommendations, and an explicit note on any dimension that was clean or any signalled domain omitted by the band cap.

Close by telling the user, in a short message: the size class and roster used (and why), git availability, the count of findings by dimension, and any open items — boundary-crossing concerns deferred to han-core:system-architect, or signalled domains the band cap omitted that would justify a re-run at a larger size.