<CRITICAL-RULE> NEVER use the Read, Write, or Edit tools on KiCad files (.kicad_sch, .kicad_pcb, .kicad_sym, .kicad_mod, .kicad_pro, .kicad_prl). ALL KiCad file manipulation MUST go through the kicad MCP tools. NEVER run kicad-cli commands via Bash. If an MCP tool returns an error, try different parameters — do NOT fall back to manual file editing.

EVERY KiCad operation has a corresponding MCP tool. Do NOT claim a tool does not exist without first listing all available tools. Key tools that MUST be used instead of file writes:

• add_symbol — create custom symbol definitions in .kicad_sym files
• create_symbol_library — create new .kicad_sym library files
• create_schematic — create new .kicad_sch files
• create_project — create new .kicad_pro project files

If you find yourself thinking "there's no MCP tool for this," you are wrong. Check the tool list again. </CRITICAL-RULE>

<SUBAGENT-STOP> If you were dispatched as a subagent to execute a specific task, skip this skill. </SUBAGENT-STOP>

<EXTREMELY-IMPORTANT> When working on ANY electronics or KiCad task, you MUST follow this pipeline. Do not place components, route traces, run checks, or select parts without first completing prior phases and their gates.

This is not optional. Do not rationalize skipping it. </EXTREMELY-IMPORTANT>

Skill Activation Flow

digraph skill_flow {
    "User message received" [shape=doublecircle];
    "KiCad/electronics task?" [shape=diamond];
    "Invoke Skill tool" [shape=box];
    "Announce: 'Using [skill] to [purpose]'" [shape=box];
    "Has checklist?" [shape=diamond];
    "Create TodoWrite todo per item" [shape=box];
    "Follow skill exactly" [shape=box];
    "Respond normally" [shape=doublecircle];

    "User message received" -> "KiCad/electronics task?";
    "KiCad/electronics task?" -> "Invoke Skill tool" [label="yes"];
    "KiCad/electronics task?" -> "Respond normally" [label="no"];
    "Invoke Skill tool" -> "Announce: 'Using [skill] to [purpose]'";
    "Announce: 'Using [skill] to [purpose]'" -> "Has checklist?";
    "Has checklist?" -> "Create TodoWrite todo per item" [label="yes"];
    "Has checklist?" -> "Follow skill exactly" [label="no"];
    "Create TodoWrite todo per item" -> "Follow skill exactly";
}

When a skill contains a checklist (items with - [ ]), you MUST create a TodoWrite entry for each item BEFORE starting work. This provides visible progress tracking throughout the design session.

Response Format

When this skill activates, print exactly:

KiCad design pipeline is active.

Then explore the project (files, git status). Present findings in this structure:

Project: [name] at [path] Existing work: [list sheets/files found, one per line] Pipeline position: [which phase the project is at based on existing artifacts like specs/bom.md, specs/schematic-plan.md]

>

What would you like to work on?

Do not list the full pipeline. Do not explain what each skill does. Do not add extra commentary beyond this structure. Keep the response under 8 lines.

KiCad Design Pipeline

This plugin enforces a validated pipeline for electronics design. Every phase produces evidence before the next phase can start.

Pipeline

circuit-design ---- requirements -> validated BOM artifact
    |
    |  EXIT GATE: resolve all lib_ids + footprints, write specs/bom.md
    |  BOM reviewer subagent validates artifact
    |  HARD GATE: user approves BOM
    |
    v
schematic-plan ---- BOM -> placement & wiring plan artifact
    |
    |  Reads specs/bom.md
    |  Produces specs/schematic-plan.md with exact coordinates
    |  Schematic plan reviewer subagent validates artifact
    |  HARD GATE: user approves plan
    |
    v
schematic-design -- plan -> mechanical execution
    |
    |  Reads specs/schematic-plan.md, executes mechanically
    |  EXIT GATE: run ERC, must be zero violations
    |
    v
verification ------ ERC gate (blocks PCB until clean)
    |
    |  HARD GATE: ERC = 0 violations
    |
    v
pcb-layout -------- netlist -> board layout
    |
    |  PRE-FLIGHT: verify all footprints exist
    |  EXIT GATE: run DRC, must be zero violations
    |
    v
verification ------ DRC gate (blocks export until clean)
    |
    |  HARD GATE: DRC = 0 violations
    |
    v
Export ------------- Gerbers, drill, BOM, pick-and-place, 3D,
                    fabrication notes, assembly drawing

Phase Gates

<HARD-GATE> Do NOT proceed to schematic-plan until specs/bom.md exists AND its reviewer has returned APPROVED AND the user has confirmed approval. </HARD-GATE>

<HARD-GATE> Do NOT proceed to schematic-design until specs/schematic-plan.md exists AND its reviewer has returned APPROVED AND the user has confirmed approval. </HARD-GATE>

<HARD-GATE> Do NOT proceed to pcb-layout until run_erc output shows violation_count = 0. "Probably clean" is not evidence. </HARD-GATE>

<HARD-GATE> Do NOT proceed to export until run_drc output shows violation_count = 0. "Probably clean" is not evidence. </HARD-GATE>

What constitutes "user approval": The user explicitly says something like "approved," "looks good," "proceed," "yes," or "go ahead." Asking a question or requesting changes is NOT approval.

Skill Catalog

Entry Points — Every Path Validates

• New design from scratch: Start at circuit-design, full pipeline.
• User provides their own BOM: Circuit-design runs in

validation-only mode — resolves every lib_id and footprint, fills in missing fields, writes specs/bom.md, runs the BOM reviewer. Skips topology selection but does NOT skip validation. The user's BOM is accepted, then audited.

• User provides a placement plan: The plan is written to

specs/schematic-plan.md, then the schematic plan reviewer is dispatched. The user's plan is accepted, then audited. If the reviewer finds issues (wrong lib_ids, coordinates outside page bounds, incorrect pin names), they are surfaced and must be resolved before execution.

• Modifying existing schematic: Enter at schematic-design in

modification mode. Lightweight pre-flight validates lib_ids for any new components via list_lib_symbols before placement.

• Running checks on existing work: Enter at verification directly.

Anti-Patterns for Electronics Design

Rationalization Prevention

What This Plugin Provides

The KiCad MCP server gives you tools to drive KiCad programmatically. You do not need the user to click anything in KiCad — the tools do it for you. Tool groups (107 tools total):

• Project: create_project, create_schematic,

create_symbol_library, create_sym_lib_table, add_hierarchical_sheet, run_jobset, get_version

• Symbol Authoring: add_symbol (create custom symbol

definitions), list_lib_symbols, get_symbol_info, export_symbol_svg, upgrade_symbol_lib

• Schematic — Place & Edit: place_component, move_component,

remove_component, set_component_property, set_page_size, add_lib_symbol

• Schematic — Wiring: connect_pins, wire_pins_to_net,

add_wires, add_label, add_global_label, add_junctions, no_connect_pin, remove_label, remove_wire, remove_junction

• Schematic — Power: add_power_symbol,

auto_place_decoupling_cap

• Schematic — Inspect: get_schematic_summary,

list_schematic_components, list_schematic_labels, list_schematic_wires, list_schematic_global_labels, list_schematic_hierarchical_labels, list_schematic_sheets, list_schematic_junctions, list_schematic_no_connects, list_schematic_bus_entries, get_symbol_pins, get_pin_positions, get_net_connections, list_unconnected_pins, add_text

• Schematic — Export: run_erc, export_schematic,

export_netlist, export_bom

• Schematic — Hierarchy & Annotation: annotate_schematic,

validate_hierarchy, add_hierarchical_sheet, remove_hierarchical_sheet, modify_hierarchical_sheet, add_sheet_pin, remove_sheet_pin, move_hierarchical_sheet, list_hierarchy, get_sheet_info, is_root_schematic, trace_hierarchical_net, list_cross_sheet_nets, get_symbol_instances, export_hierarchical_netlist, flatten_hierarchy, duplicate_sheet, reorder_sheet_pages, remove_text, add_hierarchical_label, remove_hierarchical_label, modify_hierarchical_label

• PCB — Place & Edit: place_footprint, move_footprint,

remove_footprint

• PCB — Route & Refine: add_trace, add_via, autoroute_pcb,

set_trace_width, remove_traces, add_thermal_vias, set_net_class, remove_dangling_tracks, add_copper_zone, fill_zones

• PCB — Draw: add_pcb_text, add_pcb_line
• PCB — Inspect: list_pcb_footprints, list_pcb_traces,

list_pcb_nets, list_pcb_zones, list_pcb_layers, list_pcb_graphic_items, get_board_info, get_footprint_pads

• PCB — Export: run_drc, export_pcb, export_gerbers,

export_3d, export_positions, export_ipc2581

• Footprint Libraries: list_lib_footprints,

get_footprint_info, export_footprint_svg, upgrade_footprint_lib

• Utilities: run_jobset (batch operations from .kicad_job files),

get_version (KiCad version info), export_symbol_svg, upgrade_symbol_lib, export_footprint_svg, upgrade_footprint_lib

Always invoke the matching skill for conventions, spacing, and strategy before using these tools.