Runtime Context

PREFS="${CLAUDE_PLUGIN_DATA_DIR:-$HOME/.claude/plugins/data/ops-ops-marketplace}/preferences.json"
cat "$PREFS" 2>/dev/null || echo '{}'

OPS ► SETTINGS

Manage credentials and integration config after initial setup.

Parse arguments

• --status or empty → show full credential status dashboard
• <integration-name> → jump directly to updating that integration (e.g. /ops:settings stripe)
• --status <integration-name> → show status of one integration only

Credential Status Dashboard

Read preferences.json. For each known integration, check whether the key exists and is non-empty. Also probe liveness where possible.

Display as a table:

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 OPS ► SETTINGS — Integration Status
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

 Integration         Status        Last Updated
 ─────────────────── ────────────  ─────────────
 GitHub (gh cli)     ✅ active     (always active if gh auth status)
 Stripe              ✅ configured  2026-04-14
 RevenueCat          ✅ configured  2026-04-14
 Telegram            ✅ configured  2026-04-13
 Slack               ⚠️  missing    —
 Linear              ✅ configured  2026-04-11
 Sentry              ⚠️  missing    —
 AWS                 ✅ active     (always active if aws sts works)
 Shopify             ⚠️  missing    —
 Klaviyo             ⚠️  missing    —
 Meta Ads            ⚠️  missing    —
 GA4                 ⚠️  missing    —
 ElevenLabs          ⚠️  missing    —
 Datadog             ⚠️  missing    —
 New Relic           ⚠️  missing    —
 ...

 ✅ N configured   ⚠️ N missing
──────────────────────────────────────────────────────

Probe liveness

For integrations with a cheap health check, run it to distinguish "configured but expired" from "configured and active":

Show 🔴 expired if probe fails for a previously-configured key.

Update an integration

When a specific integration is selected (via argument or user pick from dashboard):

1. Show current value (masked): sk_live_•••••••••••••••• (last 4 chars visible)
2. Use AskUserQuestion to confirm the update action:

   [Enter new value]  [Test current value]  [Clear this credential]  [Back to dashboard]

1. For "Enter new value": prompt with AskUserQuestion text input
2. Write new value to preferences.json via jq update:

   tmp=$(mktemp)
   jq --arg v "$NEW_VALUE" --arg k "$KEY_NAME" '.[$k] = $v' "$PREFS" > "$tmp" && mv "$tmp" "$PREFS"

1. Run smoke test immediately after update (see Smoke Tests section)
2. Report: ✅ Stripe key updated — smoke test passed or ⚠️ Key saved but smoke test failed: <reason>

Smoke Tests

Autopilot Studio (per-project)

Lets an operator view and edit per-project autopilot config without re-running setup. See skills/ops-marketing/SKILL.md → ## autopilot for the full field semantics.

List projects that have an autopilot block:

jq -r '.marketing.projects | to_entries[] | select(.value.autopilot) | .key' "$PREFS"

If more than 4 projects, paginate the picker at 4 per AskUserQuestion page with [More...] as the bridge (Rule 1).

Show current config for the chosen project `$P`:

jq --arg p "$P" '.marketing.projects[$p].autopilot' "$PREFS"

Editor. Drive edits via AskUserQuestion, batching the editable fields across multiple ≤4-option questions (Rule 1):

• Q1 — autonomy & kill switch: [autonomy_level] [envelope.kill_switch] [Back]
• Q2 — envelope limits: [envelope.max_campaigns] [envelope.max_new_audiences] [envelope.max_daily_budget_usd] [More...]
• Q3 — envelope allowlists: [envelope.objective_allowlist] [envelope.geo_allowlist] [Back]
• Q4 — source & creative: [source.url] [creative_gen.daily_gen_spend_cap_usd] [creative_gen.neurons.enabled] [Back]

For autonomy_level offer the 4 fixed values across one question: [create_once] [sandbox] [unrestricted] [Back]. Allowlists are comma-separated free text; numeric/boolean fields are free text or a 2-option toggle.

Merge-write pattern (mirrors the "Update an integration" jq pattern, nested under .marketing.projects[$p].autopilot — never clobber sibling keys):

tmp=$(mktemp)
jq --arg p "$P" --arg v "$V" \
  '.marketing.projects[$p].autopilot.autonomy_level = $v' "$PREFS" > "$tmp" && mv "$tmp" "$PREFS"

Use the matching jq path per field, e.g.:

# numeric envelope field (jq tonumber to keep it a number)
jq --arg p "$P" --argjson v "$V" \
  '.marketing.projects[$p].autopilot.envelope.max_campaigns = $v' "$PREFS" > "$tmp" && mv "$tmp" "$PREFS"

# boolean kill switch
jq --arg p "$P" --argjson v true \
  '.marketing.projects[$p].autopilot.envelope.kill_switch = $v' "$PREFS" > "$tmp" && mv "$tmp" "$PREFS"

# allowlist (comma-separated input -> JSON array)
jq --arg p "$P" --arg v "NL,US" \
  '.marketing.projects[$p].autopilot.envelope.geo_allowlist = ($v | split(","))' \
  "$PREFS" > "$tmp" && mv "$tmp" "$PREFS"

# source URL
jq --arg p "$P" --arg v "https://example.com" \
  '.marketing.projects[$p].autopilot.source.url = $v' "$PREFS" > "$tmp" && mv "$tmp" "$PREFS"

# Gemini gen spend cap (must be <= daily_spend_cap_usd — validate before write)
jq --arg p "$P" --argjson v "$V" \
  '.marketing.projects[$p].autopilot.creative_gen.daily_gen_spend_cap_usd = $v' \
  "$PREFS" > "$tmp" && mv "$tmp" "$PREFS"

# Neurons external signal
jq --arg p "$P" --argjson v false \
  '.marketing.projects[$p].autopilot.creative_gen.neurons.enabled = $v' \
  "$PREFS" > "$tmp" && mv "$tmp" "$PREFS"

Safety note (surface this before writing):

• Lowering autonomy_level to unrestricted removes the default creation guardrail — autonomous campaign/audience/budget creation becomes bounded only by daily_spend_cap_usd. Confirm via AskUserQuestion ([Set unrestricted] / [Keep current]) before writing.
• Setting envelope.kill_switch: true hard-stops all mutations on the next pass (stage-only, zero writes) regardless of autonomy_level.
• The Credential Status Dashboard MUST surface autonomy_level and kill_switch for every project with autopilot.enabled == true.

Pocket

Manages the voice-journal activity notifier (POCKET_API_KEY watcher + WhatsApp/email bridges + launchd agent).

Route here when the user runs /ops:settings pocket or selects "Pocket" from the dashboard.

View status

Read all four health files and print a compact status block:

STATE_DIR="$HOME/.claude/state/pocket"
for f in .activity-notifier-health .out-queue-health .email-bridge-health .whatsapp-bridge-health; do
  label="${f#.}"
  label="${label%-health}"
  content=$(cat "$STATE_DIR/$f" 2>/dev/null)
  if [ -z "$content" ]; then
    echo "$label: missing"
  else
    status=$(echo "$content" | jq -r '.status // "unknown"' 2>/dev/null)
    msg=$(echo "$content"    | jq -r '.message // ""'       2>/dev/null)
    last=$(echo "$content"   | jq -r '.last_run // ""'      2>/dev/null)
    echo "$label: $status  $msg  ($last)"
  fi
done

For each service whose status is not "ok", flag it:

activity-notifier: ok  (2026-05-20T12:34:56Z)
out-queue:         ok  sent=3  (2026-05-20T12:34:55Z)
email-bridge:      disabled  (2026-05-20T12:34:50Z)
whatsapp-bridge:   ok  scanned=12 routed=1  (2026-05-20T12:34:54Z)

Show ✗ missing for any health file that does not exist.

View task counts

STATE_DIR="$HOME/.claude/state/pocket"
echo "tasks.jsonl:          $(wc -l < "$STATE_DIR/tasks.jsonl"         2>/dev/null || echo 0) lines"
echo "pending-triage.jsonl: $(wc -l < "$STATE_DIR/pending-triage.jsonl" 2>/dev/null || echo 0) lines"
echo "executor-results/:    $(ls "$STATE_DIR/executor-results/" 2>/dev/null | wc -l | tr -d ' ') files"

Toggle channels

Ask AskUserQuestion:

Which Pocket notification channel setting would you like to change?
  [Toggle WhatsApp]  [Toggle Email]  [Edit self-address]  [Back]

Toggle WhatsApp — read ~/.claude/state/pocket/whatsapp-config.json, flip .enabled, write back:

F="$HOME/.claude/state/pocket/whatsapp-config.json"
CUR=$(jq -r '.enabled' "$F" 2>/dev/null || echo false)
NEW=$([ "$CUR" = "true" ] && echo false || echo true)
jq --argjson v "$NEW" '.enabled = $v' "$F" > "${F}.tmp" && mv "${F}.tmp" "$F"
echo "WhatsApp notifications: $NEW"

Toggle Email — same pattern with ~/.claude/state/pocket/email-config.json.

Edit self-address — show current email-config.json:.self_address, ask for new value via AskUserQuestion text input, write back:

F="$HOME/.claude/state/pocket/email-config.json"
jq --arg v "$NEW_ADDR" '.self_address = $v | .from_account = $v' "$F" > "${F}.tmp" && mv "${F}.tmp" "$F"

Configure notifications (per-event)

Fine-grained, per-event routing for the whole pocket module, dispatched by ops-pocket-notify and stored in preferences.json → pocket.notifications (schema + event list: docs/pocket-notifications.md). This is the interactive "which notifications, which channels, when" surface.

1. Pick the event to configure. The event list can exceed 4, so paginate per

Rule 1 (AskUserQuestion, ≤4 options, [More events…] to advance):

   Which pocket event?
     [env-broker.uid-rejected (security)]  [env-broker.denied]  [worker.failed]  [More events…]

Page 2: [worker.completed] [worker.spawned] [queue.stuck] [More events…], page 3: [daemon.down] [Done].

1. Pick channels for that event (multi-select, ≤4 — only offer channels that

are configured per View status above):

   Notify on <event> via: (multi-select)
     [Telegram]  [Email]  [WhatsApp]  [Slack]

1. Set the schedule for that event (one AskUserQuestion each, as needed):

• Severity: [low] [medium] [high] (high bypasses quiet hours).
• Cooldown: [60s] [5 min] [30 min] [No limit].
• Quiet hours: [22:00–08:00] [None] [Custom…].
• Active days: [Every day] [Weekdays] [Custom…].

1. Write it to preferences.json (create the path if absent):

   PREFS="${CLAUDE_PLUGIN_DATA_DIR:-$HOME/.claude/plugins/data/ops-ops-marketplace}/preferences.json"
   tmp="$(mktemp)"
   jq --arg ev "$EVENT" --argjson chans "$CHANNELS_JSON" --arg sev "$SEVERITY" \
      --argjson cooldown "$COOLDOWN" \
      '.pocket.notifications.events[$ev] = {channels: $chans, severity: $sev, schedule: {cooldown: $cooldown}}' \
      "$PREFS" > "$tmp" && mv "$tmp" "$PREFS"

(Merge quiet_hours / active_days into .schedule the same way when set.)

1. Test-send the event so the operator confirms routing without waiting for a

real trigger:

   ops-pocket-notify "$EVENT" "test notification from /ops:setup" --severity "$SEVERITY" --dry-run --json

Show the fired channels (or the suppressed reason). Offer a real send (drop --dry-run) for the chosen event so they see it land on the device.

Repeat from step 1 for the next event, or [Done].

Force a fresh Pocket pull

Run the watcher directly (picks up POCKET_API_KEY from keychain/env):

PLUGIN_ROOT="${CLAUDE_PLUGIN_ROOT:-$(ls -d "$HOME/.claude/plugins/cache/ops-marketplace/ops"/*/ 2>/dev/null | sort -V | tail -1)}"
python3 "$PLUGIN_ROOT/scripts/ops-cron-pocket-watcher.py"

Report exit code and last line of ~/.claude/state/pocket/run.log.

Restart notifier

launchctl kickstart -k "gui/$(id -u)/com.claude-ops.pocket-activity-notifier"

Wait 3 seconds then print the updated .activity-notifier-health status.

View last 3 outbound notifications

STATE_DIR="$HOME/.claude/state/pocket"
echo "=== WhatsApp (out-queue-sent.jsonl) ==="
tail -3 "$STATE_DIR/out-queue-sent.jsonl" 2>/dev/null | jq -r '"\(.sent_at // .ts // "?")  \(.message // .body // "" | .[0:80])"' 2>/dev/null || echo "(none)"
echo "=== Email (email-sent.jsonl) ==="
tail -3 "$STATE_DIR/email-sent.jsonl"     2>/dev/null | jq -r '"\(.sent_at // .ts // "?")  \(.subject // "" | .[0:80])"'                2>/dev/null || echo "(none)"

Daemon Services

Manage background daemon services declared in daemon-services.default.json. Route here when the user runs /ops:settings daemons or selects "Daemon services" from the dashboard.

Display the daemon services table

DAEMON_DEFAULT="${CLAUDE_PLUGIN_ROOT}/scripts/daemon-services.default.json"
DAEMON_OVERRIDE="${CLAUDE_PLUGIN_DATA_DIR:-$HOME/.claude/plugins/data/ops-ops-marketplace}/daemon-services.override.json"

# Merge: override file wins on matching service keys
if [ -f "$DAEMON_OVERRIDE" ]; then
  jq -s '.[0].services * .[1].services' "$DAEMON_DEFAULT" "$DAEMON_OVERRIDE" 2>/dev/null
else
  jq '.services' "$DAEMON_DEFAULT" 2>/dev/null
fi

Display as a table (for each service, show enabled state, last_run age, and health status from the health_file if declared):

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 OPS ► SETTINGS — Daemon Services
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

 Service                   Enabled   Last Run      Health
 ──────────────────────── ───────── ────────────  ────────────
 briefing-pre-warm          ✅ on    2m ago        ✓ ok
 memory-extractor           ✅ on    18m ago       ✓ ok
 message-listener           ⏸ off   —             —
 competitor-intel           ⏸ off   —             —
 marketing-autopilot        ⏸ off   —             —

──────────────────────────────────────────────────────────────────

For each enabled: true service with a health_file, expand ~ → $HOME, read the JSON file, extract .last_run and .status. Services with no health_file show —.

Toggle a service on or off

Writes to the override file only — never edits daemon-services.default.json.

Confirm each toggle via AskUserQuestion ([Enable] / [Disable] / [Cancel]) before writing.

DAEMON_OVERRIDE="${CLAUDE_PLUGIN_DATA_DIR:-$HOME/.claude/plugins/data/ops-ops-marketplace}/daemon-services.override.json"
tmp=$(mktemp)
# Enable:
jq --arg svc "$SERVICE_NAME" '.services[$svc].enabled = true' \
  "${DAEMON_OVERRIDE}" > "$tmp" 2>/dev/null \
  || echo "{\"services\":{\"$SERVICE_NAME\":{\"enabled\":true}}}" > "$tmp"
mv "$tmp" "$DAEMON_OVERRIDE"
# Disable: same pattern with `= false`

If the override file does not exist yet, initialise it with {"services":{}} before writing.

View last 5 log lines for a service

OPS_DATA_DIR="${CLAUDE_PLUGIN_DATA_DIR:-$HOME/.claude/plugins/data/ops-ops-marketplace}"
tail -n 5 "$OPS_DATA_DIR/logs/${SERVICE_NAME}.log" 2>/dev/null || echo "(no log file found)"

Manually trigger a service

• launchd-registered (plist-backed, e.g. whatsapp-bridge):

  launchctl kickstart -k "gui/$UID/com.<user>.${SERVICE_NAME}"

• Cron-style / script-based (have a command pointing to a .sh file):

  COMMAND=$(jq -r ".services[\"$SERVICE_NAME\"].command" "$DAEMON_DEFAULT" \
    | sed "s|\${CLAUDE_PLUGIN_ROOT}|${CLAUDE_PLUGIN_ROOT}|g")
  bash "$COMMAND"

Always confirm via AskUserQuestion ([Run now] / [Cancel]) before triggering.

Home Automation (Homey Pro)

Route here when the user runs /ops:settings home or selects "Home Automation" from the dashboard.

View status

PREFS="${CLAUDE_PLUGIN_DATA_DIR:-$HOME/.claude/plugins/data/ops-ops-marketplace}/preferences.json"
jq '.home_automation // empty' "$PREFS" 2>/dev/null

Display as a compact block:

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 OPS ► SETTINGS — Home Automation (Homey Pro)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 Status:        ✅ configured   (or ⚠️  not configured)
 Local URL:     https://192.168.1.••• (mask all but last octet)
 Local token:   ••••••••••••abcd  (last 4 chars only)
 Cloud token:   ✅ present   (or ○ not set)
 Homey ID:      ✅ present   (or ○ not set)
──────────────────────────────────────────────────────
 [r] reconfigure → /ops:setup --section home

URL masking: replace all octets except the last with •••, e.g. https://192.168.1.42 → https://•••.•••.•••.42. Token masking: show last 4 characters only, prefix with ••••••••••••.

If home_automation key is absent from preferences.json, show:

 Status:  ○ not configured — run /ops:setup --section home

Reconfigure

When the user selects [r] reconfigure, route to /ops:setup --section home (invoke the 3k-home sub-flow of the setup wizard).

CLI/API Reference