STAR — Spliced RNA-seq Aligner

Overview

STAR (Spliced Transcripts Alignment to a Reference) aligns RNA-seq reads to a genome in a splice-aware manner, identifying novel and annotated splice junctions in a single pass. It generates coordinate-sorted BAM files compatible with samtools, IGV, deeptools, and GATK. STAR's 2-pass mode re-aligns reads using junctions discovered in the first pass, improving sensitivity for novel splice sites. With --quantMode GeneCounts, STAR simultaneously produces gene-level read count tables without requiring a separate featureCounts or HTSeq step.

When to Use

• Aligning bulk RNA-seq reads to a reference genome when downstream tools require a BAM file (variant calling, visualization, deeptools)
• Running ENCODE-compliant RNA-seq pipelines that mandate genome alignment
• Discovering novel splice junctions and alternative splicing events in the dataset
• Generating gene count tables alongside BAM alignment in a single step with --quantMode GeneCounts
• Processing long reads or reads with high mismatch rates by tuning --outFilterMismatchNmax
• Use Salmon instead when you only need transcript/gene quantification and do not need a BAM file — Salmon is 20-50× faster

Prerequisites

• Software: STAR ≥ 2.7.0 (conda or compiled binary)
• Reference files: genome FASTA + GTF annotation (same assembly)
• RAM: 30–32 GB for human/mouse genome index; 8–16 GB for smaller genomes
• Disk: ~25 GB for human genome index, ~5–10 GB per sample BAM

Check before installing: The tool may already be available in the current environment (e.g., inside a pixi / conda env). Run command -v STAR first and skip the install commands below if it returns a path. When running inside a pixi project, invoke the tool via pixi run STAR rather than bare STAR.

# Install with conda (recommended)
conda install -c bioconda star

# Verify
STAR --version
# STAR_2.7.11a

# Or compile from source
git clone https://github.com/alexdobin/STAR
cd STAR/source && make STAR

Pre-flight Interview

Settle these with the user before writing any analysis code.

decisions:
  - id: D1
    param: reference_bundle
    kind: required
    source: user
    ask: "Which species, genome assembly, and matching GTF annotation release should be used?"
    default: null

  - id: D2
    param: --sjdbOverhang
    kind: derived
    source: data
    ask: "What is the longest trimmed read length observed in the FASTQ files?"
    default: "maximum trimmed read length minus 1"

  - id: D3
    param: --quantMode
    kind: derived
    source: upstream
    ask: "Does the downstream workflow require STAR gene counts, transcriptome BAM for RSEM, or only the genomic BAM?"
    default: "no quantMode; emit a coordinate-sorted genomic BAM"

  - id: D4
    param: --twopassMode
    kind: optional
    source: user
    ask: "Should alignment prioritize sensitive discovery of novel splice junctions?"
    default: "None"

  - id: D5
    param: --outFilterMultimapNmax
    kind: optional
    source: user
    ask: "How many genomic loci may a read match before it is treated as too ambiguous to align?"
    default: 10

  - id: D6
    param: --outFilterMismatchNmax
    kind: optional
    source: user
    ask: "Does this assay require a non-default maximum number of alignment mismatches?"
    default: 10

  - id: D7
    param: --alignIntronMax
    kind: optional_conditional
    source: literature
    ask: "Does the organism or assay require an intron-length limit different from the reference bundle's standard setting?"
    default: 1000000

  - id: D8
    param: --genomeSAindexNbases
    kind: never_ask
    source: data
    reason: "Calculated from genome length to size the index; it affects memory use, not the biological result."
    default: "min(14, floor(log2(genome_length) / 2 - 1))"

  - id: D9
    param: --runThreadN
    kind: never_ask
    source: data
    reason: "Affects runtime only, not the alignments"
    default: "min(8, available_cores)"

D2 is measured from the input FASTQ rather than chosen by the user. The GTF, genome FASTA, and STAR index must all come from the same reference release. GeneCounts produces STAR's own counts; omit it when featureCounts will produce the count matrix. TranscriptomeSAM is for transcriptome-BAM consumers such as RSEM, not ordinary Salmon quantification.

Quick Start

# 1. Generate genome index (~30 min, run once)
STAR --runMode genomeGenerate \
     --runThreadN 8 \
     --genomeDir genome/star_index \
     --genomeFastaFiles genome/GRCh38.fa \
     --sjdbGTFfile genome/gencode.v47.gtf \
     --sjdbOverhang 100    # ReadLength - 1

# 2. Align paired-end reads (~10-20 min)
STAR --runThreadN 8 \
     --genomeDir genome/star_index \
     --readFilesIn sample_R1.fastq.gz sample_R2.fastq.gz \
     --readFilesCommand zcat \
     --outSAMtype BAM SortedByCoordinate \
     --outFileNamePrefix results/sample/

# 3. Index the BAM
samtools index results/sample/Aligned.sortedByCoord.out.bam

Workflow

Step 1: Prepare Reference Files

Download a genome FASTA and matching GTF annotation (same assembly version).

# Download GRCh38 genome and GENCODE annotation
wget https://ftp.ebi.ac.uk/pub/databases/gencode/Gencode_human/release_47/GRCh38.primary_assembly.genome.fa.gz
wget https://ftp.ebi.ac.uk/pub/databases/gencode/Gencode_human/release_47/gencode.v47.primary_assembly.annotation.gtf.gz

gunzip GRCh38.primary_assembly.genome.fa.gz gencode.v47.primary_assembly.annotation.gtf.gz
mkdir -p genome/star_index

echo "Genome and GTF ready."
ls -lh GRCh38.primary_assembly.genome.fa gencode.v47.primary_assembly.annotation.gtf

Step 2: Generate Genome Index

Build the STAR genome index — required once per genome/read-length combination.

# Standard human genome index (requires ~32 GB RAM)
STAR --runMode genomeGenerate \
     --runThreadN 16 \
     --genomeDir genome/star_index/ \
     --genomeFastaFiles GRCh38.primary_assembly.genome.fa \
     --sjdbGTFfile gencode.v47.primary_assembly.annotation.gtf \
     --sjdbOverhang 100

# For small genomes (e.g., E. coli ~4.6 Mb), reduce genomeSAindexNbases
# STAR --runMode genomeGenerate \
#      --genomeSAindexNbases 11 \
#      --genomeDir genome/ecoli_index/ ...

echo "Index complete: $(ls genome/star_index/ | wc -l) files"

Step 3: Align RNA-seq Reads

Align single-end or paired-end FASTQ files to the indexed genome.

# Single-end alignment
STAR --runThreadN 8 \
     --genomeDir genome/star_index/ \
     --readFilesIn sample1.fastq.gz \
     --readFilesCommand zcat \
     --outSAMtype BAM SortedByCoordinate \
     --outSAMattributes NH HI AS NM MD \
     --outFileNamePrefix results/sample1/

# Paired-end alignment
STAR --runThreadN 8 \
     --genomeDir genome/star_index/ \
     --readFilesIn sample1_R1.fastq.gz sample1_R2.fastq.gz \
     --readFilesCommand zcat \
     --outSAMtype BAM SortedByCoordinate \
     --outSAMattributes NH HI AS NM MD \
     --outFileNamePrefix results/sample1/

echo "BAM: results/sample1/Aligned.sortedByCoord.out.bam"

Step 4: Run 2-Pass Alignment for Improved Sensitivity

Two-pass mode collects splice junctions from the first pass and uses them as annotation for the second pass.

# First pass — collect splice junctions
STAR --runThreadN 8 \
     --genomeDir genome/star_index/ \
     --readFilesIn sample1_R1.fastq.gz sample1_R2.fastq.gz \
     --readFilesCommand zcat \
     --outSAMtype None \
     --outFileNamePrefix pass1/sample1/

# Second pass — realign with all junctions from pass 1
SJ_FILES=$(ls pass1/*/SJ.out.tab | tr '\n' ' ')

STAR --runThreadN 8 \
     --genomeDir genome/star_index/ \
     --readFilesIn sample1_R1.fastq.gz sample1_R2.fastq.gz \
     --readFilesCommand zcat \
     --sjdbFileChrStartEnd $SJ_FILES \
     --outSAMtype BAM SortedByCoordinate \
     --outFileNamePrefix results/sample1/

# Alternative: single-command 2-pass
STAR --runThreadN 8 \
     --genomeDir genome/star_index/ \
     --readFilesIn sample1_R1.fastq.gz sample1_R2.fastq.gz \
     --readFilesCommand zcat \
     --twopassMode Basic \
     --outSAMtype BAM SortedByCoordinate \
     --outFileNamePrefix results/sample1/

Step 5: Check Alignment Statistics

Parse the alignment log to assess mapping rate and read quality.

# View the alignment summary
cat results/sample1/Log.final.out

# Parse key metrics with python
python3 - << 'EOF'
import re, sys
from pathlib import Path

log = Path("results/sample1/Log.final.out").read_text()
metrics = {}
for line in log.splitlines():
    if "|" in line:
        key, _, val = line.partition("|")
        metrics[key.strip()] = val.strip()

print(f"Unique mapping:     {metrics.get('Uniquely mapped reads %', 'N/A')}")
print(f"Multi-mapping:      {metrics.get('% of reads mapped to multiple loci', 'N/A')}")
print(f"Too many mismatches:{metrics.get('% of reads unmapped: too many mismatches', 'N/A')}")
print(f"Total input reads:  {metrics.get('Number of input reads', 'N/A')}")
EOF

Step 6: Generate Gene Count Tables

Enable simultaneous gene counting during alignment using --quantMode GeneCounts.

# Align and count simultaneously
STAR --runThreadN 8 \
     --genomeDir genome/star_index/ \
     --readFilesIn sample1_R1.fastq.gz sample1_R2.fastq.gz \
     --readFilesCommand zcat \
     --outSAMtype BAM SortedByCoordinate \
     --quantMode GeneCounts \
     --outFileNamePrefix results/sample1/

# ReadsPerGene.out.tab has 4 columns:
# gene_id  unstranded  stranded_fwd  stranded_rev
head results/sample1/ReadsPerGene.out.tab

# Load into pandas (select column based on library strandedness)
python3 - << 'EOF'
import pandas as pd

df = pd.read_csv("results/sample1/ReadsPerGene.out.tab",
                 sep="\t", header=None, skiprows=4,
                 names=["gene_id", "unstranded", "fwd", "rev"])
# For unstranded library: use column 2 (unstranded)
counts = df.set_index("gene_id")["unstranded"]
print(f"Genes with counts > 0: {(counts > 0).sum()}")
print(counts[counts > 0].sort_values(ascending=False).head())
EOF

Key Parameters

Common Recipes

Recipe 1: Batch Align All Samples

#!/bin/bash
# Align all paired-end samples in a directory
SAMPLES=(ctrl_1 ctrl_2 treat_1 treat_2)
INDEX="genome/star_index"
DATA="data"
OUT="results"
THREADS=12

mkdir -p "$OUT"
for sample in "${SAMPLES[@]}"; do
    echo "Aligning: $sample"
    mkdir -p "$OUT/$sample"
    STAR --runThreadN "$THREADS" \
         --genomeDir "$INDEX" \
         --readFilesIn "$DATA/${sample}_R1.fastq.gz" "$DATA/${sample}_R2.fastq.gz" \
         --readFilesCommand zcat \
         --outSAMtype BAM SortedByCoordinate \
         --quantMode GeneCounts \
         --twopassMode Basic \
         --outFileNamePrefix "$OUT/$sample/"
    samtools index "$OUT/$sample/Aligned.sortedByCoord.out.bam"
    echo "Done: $sample — $(grep 'Uniquely mapped reads %' $OUT/$sample/Log.final.out | awk '{print $NF}')"
done

Recipe 2: Build Gene Count Matrix Across Samples

import pandas as pd
from pathlib import Path

results_dir = Path("results")
samples = ["ctrl_1", "ctrl_2", "treat_1", "treat_2"]
strandedness = "unstranded"  # or "fwd" / "rev"

col_map = {"unstranded": 1, "fwd": 2, "rev": 3}
col = col_map[strandedness]

counts = {}
for sample in samples:
    count_file = results_dir / sample / "ReadsPerGene.out.tab"
    df = pd.read_csv(count_file, sep="\t", header=None, skiprows=4)
    counts[sample] = df.set_index(0)[col]

matrix = pd.DataFrame(counts)
matrix = matrix[matrix.sum(axis=1) > 0]  # drop zero-count genes
matrix.to_csv("gene_count_matrix.tsv", sep="\t")
print(f"Count matrix: {matrix.shape} (genes × samples)")
print(matrix.head())

Recipe 3: Integrate with DESeq2 via pydeseq2

import pandas as pd
from pydeseq2.dds import DeseqDataSet
from pydeseq2.default_inference import DefaultInference

# Load count matrix from STAR output
counts = pd.read_csv("gene_count_matrix.tsv", sep="\t", index_col=0).T
metadata = pd.DataFrame({
    "condition": ["control", "control", "treated", "treated"]
}, index=counts.index)

# Run DESeq2
dds = DeseqDataSet(counts=counts, metadata=metadata,
                   design_factors="condition",
                   inference=DefaultInference(n_cpus=4))
dds.deseq2()
print("DESeq2 complete — see dds.varm['LFC'] for results")

Expected Outputs

Troubleshooting

References

• STAR GitHub repository — source code, releases, and STAR manual PDF
• Dobin A et al. (2013) "STAR: ultrafast universal RNA-seq aligner" — Bioinformatics 29(1):15-21. DOI:10.1093/bioinformatics/bts635
• ENCODE RNA-seq alignment standards — ENCODE project guidelines using STAR
• GENCODE genome annotations — recommended GTF source for human/mouse STAR indices