Version Compatibility

Reference examples tested with: BioPython 1.83+, pandas 2.2+, primer3-py 2.0+

Before using code patterns, verify installed versions match. If versions differ:

• Python: pip show <package> then help(module.function) to check signatures

If code throws ImportError, AttributeError, or TypeError, introspect the installed package and adapt the example to match the actual API rather than retrying.

PCR Primer Design

"Design primers for this sequence" → Given a template sequence and constraints (product size, Tm, GC%), find ranked primer pairs that amplify the target region.

• Python: primer3.design_primers() (primer3-py)
• CLI: primer3_core (Primer3)

Design PCR primers using primer3-py, the Python binding for Primer3.

Required Imports

import primer3
from primer3 import p3helpers
from Bio import SeqIO
from Bio.Seq import Seq

Sequence Preparation (p3helpers)

# Sanitize sequence (uppercase, remove whitespace)
raw_seq = '  atgc gatc GATC  '
clean_seq = p3helpers.sanitize_sequence(raw_seq)
print(f'Cleaned: {clean_seq}')  # 'ATGCGATCGATC'

# Reverse complement for designing reverse primers
seq = 'ATGCGATCGATC'
rc_seq = p3helpers.reverse_complement(seq)
print(f'Reverse complement: {rc_seq}')  # 'GATCGATCGCAT'

# Ensure valid DNA sequence (ACGT only, uppercase)
valid_seq = p3helpers.ensure_acgt_uppercase('atgcNNgatc')  # Raises error if invalid

Basic Primer Design

sequence = 'ATGCGTACGATCGATCGATCGATCGATCGATCGATCGATCGATCGATCGATCGATCGATCGATCG'

result = primer3.design_primers(
    seq_args={'SEQUENCE_TEMPLATE': sequence},
    global_args={
        'PRIMER_PRODUCT_SIZE_RANGE': [[100, 300]],
        'PRIMER_MIN_TM': 57.0,
        'PRIMER_OPT_TM': 60.0,
        'PRIMER_MAX_TM': 63.0,
        'PRIMER_MIN_GC': 40.0,
        'PRIMER_MAX_GC': 60.0,
    }
)

Extract Primer Results

num_returned = result['PRIMER_PAIR_NUM_RETURNED']
print(f'Found {num_returned} primer pairs')

for i in range(num_returned):
    left = result[f'PRIMER_LEFT_{i}_SEQUENCE']
    right = result[f'PRIMER_RIGHT_{i}_SEQUENCE']
    left_tm = result[f'PRIMER_LEFT_{i}_TM']
    right_tm = result[f'PRIMER_RIGHT_{i}_TM']
    product_size = result[f'PRIMER_PAIR_{i}_PRODUCT_SIZE']
    print(f'Pair {i}: {left} / {right}')
    print(f'  Tm: {left_tm:.1f}C / {right_tm:.1f}C, Product: {product_size}bp')

Target a Specific Region

# Target a specific region: [start, length]
result = primer3.design_primers(
    seq_args={
        'SEQUENCE_TEMPLATE': sequence,
        'SEQUENCE_TARGET': [100, 50],  # Target region at position 100, length 50
    },
    global_args={
        'PRIMER_PRODUCT_SIZE_RANGE': [[150, 300]],
        'PRIMER_OPT_TM': 60.0,
    }
)

Primers Must Span a Region

# Primers must span this region (e.g., exon junction)
result = primer3.design_primers(
    seq_args={
        'SEQUENCE_TEMPLATE': sequence,
        'SEQUENCE_INCLUDED_REGION': [50, 200],  # Primers within this region
    },
    global_args={'PRIMER_PRODUCT_SIZE_RANGE': [[100, 250]]}
)

Exclude Regions

# Exclude regions (e.g., SNP positions, repeats)
result = primer3.design_primers(
    seq_args={
        'SEQUENCE_TEMPLATE': sequence,
        'SEQUENCE_EXCLUDED_REGION': [[150, 20], [300, 15]],  # Regions to avoid
    },
    global_args={'PRIMER_PRODUCT_SIZE_RANGE': [[100, 300]]}
)

Constrain Primer Positions

# Force primer to overlap a specific position
result = primer3.design_primers(
    seq_args={
        'SEQUENCE_TEMPLATE': sequence,
        'SEQUENCE_FORCE_LEFT_START': 50,   # Left primer must start here
        'SEQUENCE_FORCE_RIGHT_START': 250,  # Right primer must start here
    },
    global_args={'PRIMER_PRODUCT_SIZE_RANGE': [[150, 250]]}
)

Design for Sequencing

# Single primer for sequencing
result = primer3.design_primers(
    seq_args={'SEQUENCE_TEMPLATE': sequence},
    global_args={
        'PRIMER_PICK_LEFT_PRIMER': 1,
        'PRIMER_PICK_RIGHT_PRIMER': 0,  # Only design left primer
        'PRIMER_PICK_INTERNAL_OLIGO': 0,
        'PRIMER_OPT_SIZE': 20,
        'PRIMER_MIN_SIZE': 18,
        'PRIMER_MAX_SIZE': 25,
    }
)

Full Parameter Control

result = primer3.design_primers(
    seq_args={
        'SEQUENCE_TEMPLATE': sequence,
        'SEQUENCE_TARGET': [200, 50],
    },
    global_args={
        'PRIMER_PRODUCT_SIZE_RANGE': [[150, 300], [300, 500]],  # Multiple ranges
        'PRIMER_NUM_RETURN': 5,
        'PRIMER_MIN_SIZE': 18,
        'PRIMER_OPT_SIZE': 20,
        'PRIMER_MAX_SIZE': 25,
        'PRIMER_MIN_TM': 57.0,
        'PRIMER_OPT_TM': 60.0,
        'PRIMER_MAX_TM': 63.0,
        'PRIMER_MIN_GC': 40.0,
        'PRIMER_OPT_GC_PERCENT': 50.0,
        'PRIMER_MAX_GC': 60.0,
        'PRIMER_MAX_POLY_X': 4,           # Max consecutive identical bases
        'PRIMER_MAX_NS_ACCEPTED': 0,       # No ambiguous bases
        'PRIMER_MAX_SELF_ANY': 8,          # Self-complementarity
        'PRIMER_MAX_SELF_END': 3,          # 3' self-complementarity
        'PRIMER_PAIR_MAX_COMPL_ANY': 8,    # Pair complementarity
        'PRIMER_PAIR_MAX_COMPL_END': 3,    # Pair 3' complementarity
        'PRIMER_MAX_END_STABILITY': 9.0,   # Max 3' end stability (delta G)
    }
)

Load Sequence from FASTA

from Bio import SeqIO

record = SeqIO.read('gene.fasta', 'fasta')
sequence = str(record.seq)

result = primer3.design_primers(
    seq_args={'SEQUENCE_TEMPLATE': sequence, 'SEQUENCE_ID': record.id},
    global_args={'PRIMER_PRODUCT_SIZE_RANGE': [[100, 300]], 'PRIMER_OPT_TM': 60.0}
)

Calculate Tm Directly

# Calculate Tm for an existing primer
tm = primer3.calc_tm('ATGCGATCGATCGATCGATC')
print(f'Tm: {tm:.1f}C')

# With custom salt/DNA concentrations
tm = primer3.calc_tm('ATGCGATCGATCGATCGATC', mv_conc=50.0, dv_conc=1.5, dntp_conc=0.2, dna_conc=50.0)

Tm Calculation Defaults

Calculate Hairpin and Dimer Tm

# Hairpin Tm
hairpin = primer3.calc_hairpin('ATGCGATCGATCGATCGATC')
print(f'Hairpin Tm: {hairpin.tm:.1f}C, dG: {hairpin.dg:.1f}')

# Homodimer Tm
homodimer = primer3.calc_homodimer('ATGCGATCGATCGATCGATC')
print(f'Homodimer Tm: {homodimer.tm:.1f}C, dG: {homodimer.dg:.1f}')

# Heterodimer Tm (between two different primers)
heterodimer = primer3.calc_heterodimer('ATGCGATCGATCGATCGATC', 'GCTAGCTAGCTAGCTAGCTA')
print(f'Heterodimer Tm: {heterodimer.tm:.1f}C, dG: {heterodimer.dg:.1f}')

Format Results as DataFrame

Goal: Convert primer3 results into a tabular format for comparison, filtering, or export.

Approach: Loop over returned pairs, extract sequence/Tm/GC/size/penalty for each, and build a DataFrame.

Reference (pandas 2.2+):

import pandas as pd

def primers_to_dataframe(result):
    rows = []
    for i in range(result['PRIMER_PAIR_NUM_RETURNED']):
        rows.append({
            'pair': i,
            'left_seq': result[f'PRIMER_LEFT_{i}_SEQUENCE'],
            'right_seq': result[f'PRIMER_RIGHT_{i}_SEQUENCE'],
            'left_tm': result[f'PRIMER_LEFT_{i}_TM'],
            'right_tm': result[f'PRIMER_RIGHT_{i}_TM'],
            'left_gc': result[f'PRIMER_LEFT_{i}_GC_PERCENT'],
            'right_gc': result[f'PRIMER_RIGHT_{i}_GC_PERCENT'],
            'product_size': result[f'PRIMER_PAIR_{i}_PRODUCT_SIZE'],
            'penalty': result[f'PRIMER_PAIR_{i}_PENALTY'],
        })
    return pd.DataFrame(rows)

df = primers_to_dataframe(result)
print(df)

Common Global Arguments

Related Skills

• qpcr-primers - Design primers with internal probes for qPCR
• primer-validation - Check primers for specificity and secondary structures
• sequence-io - Load template sequences
• database-access/local-blast - BLAST primers for specificity checking